Upcycled Winter Hat, Scarf and Gloves
I started this project with a pretty pink hat I purchased last winter. I really liked the way this hat was made and upon trying the hat on I found out that it didn’t quite reach down over my ears, but I bought it anyway, because I really loved it and knew from the way it was made that I could work with it. I instantly got a bunch of ideas on how I could create a better fit. I then also bought the matching pink scarf and gloves.
I knew I could crochet a band of yarn around the bottom edge of the hat to extend the length and cover my ears. As you may know from my past articles, I am constantly on the hunt for yarn and fabric sales so I have a little collection of each of those. I looked through my skeins of yarns and found several colors that I thought might look great crocheted around the bottom edge of my hat.
When I was ready to start crocheting, some of the yarn colors that I had were in various shades of pink, gray and purple, but when I pulled out a skein of thick black velour yarn, I couldn’t believe how beautiful the thick texture of this velour yarn looked against the knotted texture of the hat’s pink yarn.
Using a size K crochet needle, I crocheted eleven single chains and then five rows before I laid the band onto the edge of the hat. I then folded a bit of the band’s bottom edge over the bottom edge of the hat. The thick velour band looked very nice and well balanced against the heavy thick texture of the hat’s pink yarn.
Because I knew how well the velour yarn looked crocheted with the pink yarn, I decided to crochet two additional braids of single chains all the way around the scarf and then laid them separately (about six inches apart) near each end of the pink scarf. I then hand sewed four braids onto the scarf. I then did the same for the gloves, except that I only crocheted one braid for each glove.
Last, I made the fringe, which I cut and measured by eye. I simply cut one strand of the velour yarn (about 3 inches long), measured how long I really wanted the fringe to be by pulling the strand through one stitch of the scarf’s last row. I then trimmed it to the length I liked, cut all strands to the same length.
Using the same size K crochet needle, I pulled through only two velour yarn strands through one scarf stitch, tied the two strands near the top (using a separate velour yarn strand from the skein), tied a double knot and then I cut the strand two ends (from the skein) to the length of the strands I just tied (this makes the fringe thicker). In a similar fashion, I inserted two strands (tied and knotted) through every three scarf stitches (of the scarf’s last row), until I finished each end of the scarf. Even though this project took me a while to complete, it was a very simple project anyone can do and the embellishments you can use to reflect your taste are endless.
Upcycled Knitted Winter Hat
Upcycled Pink Knitted Hat Scarf and Gloves
Embellished Black Fleece Hat and Scarf
This project started out for me with a worn black fleece hat I had used for more then a few winters. The hat is very warm and very comfortable to wear, and since I have a big head it’s sometimes hard to find a nice winter hat that fits just right. I had some thick corduroy fabric I had previously purchased for making some armrest mats for our couch, but ended up using it for other projects, one of them being a cell phone case for my husband and the brim of the black fleece hat featured in this blog post.
I started by first measuring the hat’s circumference and height because I needed to go all the way around the rim of the hat. I also made sure to include enough fabric to fold over and into the inside rim of the hat. Once I pinned the fabric to the hat, I cut it and started sewing the fabric to the hat. After the corduroy fabric was completely sewn onto the hat, I was very happy with the results and decided to add a little sparkle by sewing on a few seed beads to a very small area on the front of the hat.
I measured the leftover fabric and decided to sew a band onto the bottom ends of my black fleece scarf. I was very glad that I could give my old hat a new look and it was especially nice that I could make a matching hat and scarf set.
This was a fun and easy project for me to do and the embellishments are endless. You can use old earrings, an old pin, knitted pieces, or even feathers if you wanted to, and although I enjoy sewing, you could always use fabric glue or hot glue to adhere your pieces. Remember to have fun and enjoy your embellishing projects to reflect you. So if you have an old hat you just can’t part with, retrobellish it and reinvent it.
Embellished Black Fleece Hat
Embellished Black Fleece Hat Top View
Embellished Scarf To Match Hat
Purple Blouse To Embellished Jacket
This project started out as a blouse I picked up at a local resale shop. I really love the style and deep plum color of this blouse, especially the iridescent colors it reflects under different lighting. And as interesting as this fabric is, the iridescence made it difficult to capture the deep plum color in the photographs below, but the true plum color is visible in the silky threading of the beaded trim.
What gave me the idea to embellish this blouse, and perhaps convert it to an evening jacket, was that the fabric color was a perfect match for a great trim I had bought months ago at a clearance sale. I’m a big fan of sparkly beaded trim embellishments and this beautiful trim happened to be such a bargain. It was so amazing to have found a trim and (months later) a blouse that matched so perfectly in this shade of deep plum purple.
I measured the blouse and trim, and was glad that there was more than enough trim to not only complete this project, but to sew onto both cuffs as well. To prepare the blouse, I washed and ironed it, removed all of the buttons (but not the cuff buttons). I then pinned down the collar to the inside of the blouse leaving just a half inch of the collar showing above the collar line. I then started hand sewing the pinned down fabric flat to the neckline.
Because the trim was ten yards long, it was heavy and bulky, so I decided to first pin it onto the blouse. I pinned one trim end to the front left edge of the opening up towards the collar, around the neckline, and then back down the front right edge of the opening (over the area where the buttons used to be). Once the entire trim was pinned in place, I cut the trim away from the edge end. Then I started hand sewing the trim to the blouse (which took me three evenings).
This was a simple and inexpensive project to do. I enjoyed working on this project and am very happy with the results. It’s amazing how a pretty trim converted the look of a blouse into a jacket.
Adding Trim To Jacket
Finished Purple Jacket
Reclaimed Fabric Paris Theme Purse
This small evening purse was made from the reclaimed fabric of a bridesmaid dress that I know I’ll never wear again. In the past, I’ve donated bridesmaid dresses, but there were only a few that I just couldn’t part with because the dress fabric was so beautiful. I saved these dresses, took my time taking them apart, saving the zippers, buttons and fabrics. As a big fan of all things Paris, I decided that I would use this beautiful pink silky fabric to make a Paris themed purse. The first thing that came to mind was the Eiffel Tower, so I decided to make an Eiffel Tower of sequins. I really didn’t know how this would turn out, but thought I’d give it a try.
The purse is only 8 inches long by 6-1/2 inches wide and I was able to use embellishments I already had. I used the pink fabric (doubled because it was very thin) that I hand sewed in a pocket style, two strips of black lacey trim that I also sewed on, small black sequins on a single strand to make the abstract Eiffel Tower, and a very light lacey black trim for the very bottom edge of the purse. For the handle I used a 22 gauge wire, two pieces of black velour (from a roll) that I sewed in a tube (then turned inside out), and pink pearls from an old necklace.
I cut two small strips of pink fabric (2 inches by a half inch) to make two very little fabric loops. I sewed one fabric loop on the left, near the top and inside of the purse, and the other fabric loop on the right side. It was through these fabric loops that I would pass the wire end and curl it to seal it with pliers leaving the other wire end free. I passed one of two velour tubes through the wire, then the pearls, then the other velour tube. I then passed the other wire end through the little fabric loop and sealed it as well.
For a closure, I used a small snap on the inside top center of the purse, but I also embellished the outside center with one large black sequin (that has a hole on the top center) and then sewed on a pearl in front of the sequin (hole). I really loved the way this little purse turned out and although the Eiffel Tower is abstract, you can also make this purse and use a store bought applique for a more realistic look.
Beading The Wire Handle
Reclaimed Fabric Paris Theme Purse
Reclaimed Fabric Red & Black Choker
The choker was made from a leftover red fabric strip of soft thick cotton and a stretchy black netting that I knitted. I knitted the two pieces (using size 8 knitting needles and size 3 crochet thread–12 stitches wide by 36 rows). Next I hand sewed the edges of the finished knitted piece at the edges stretching it as I sewed it across the face of the red fabric to make the stitches wider and show off more of the red fabric. I then sewed on a trim all the way across on both edges.
Separately, I sewed the same trim in little loops around the center so it looked like a flower. I then sewed three little red and black ceramic beads in the center of the flower. I then crocheted (using size E/4 crochet needle) two little squares as closures (using size 3 red crochet thread) and sewed a black button to one end and a little crocheted loop on the other end. I then sewed each red crocheted piece at each end of the choker.
Recently, I had made a black and gold striped cuff in a previous article and thought it would be a great idea to make a choker with other leftover fabric pieces and embellishments I already had.
Sewing The Black Trim On the Finished Choker.
Reclaimed Fabric Red & Black Choker